dor_id: 4137925
506.#.#.a: Público
590.#.#.d: Los artículos enviados a la "Revista AIDIS de Ingeniería y Ciencias Ambientales: investigación, desarrollo y práctica", se juzgan por medio de un proceso de revisión por pares
510.0.#.a: Sistema Regional de Información en Línea para Revistas Científicas de América Latina, el Caribe, España y Portugal (Latindex)
561.#.#.u: http://www.iingen.unam.mx/es-mx/Paginas/default.aspx
650.#.4.x: Ingenierías
336.#.#.b: article
336.#.#.3: Artículo Técnico-Profesional
336.#.#.a: Artículo
351.#.#.6: https://revistas.unam.mx/index.php/aidis/index
351.#.#.b: Revista AIDIS de Ingeniería y Ciencias Ambientales: investigación, desarrollo y práctica
351.#.#.a: Artículos
harvesting_group: RevistasUNAM
270.1.#.p: Revistas UNAM. Dirección General de Publicaciones y Fomento Editorial, UNAM en revistas@unam.mx
590.#.#.c: Open Journal Systems (OJS)
270.#.#.d: MX
270.1.#.d: México
590.#.#.b: Concentrador
883.#.#.u: https://revistas.unam.mx/catalogo/
883.#.#.a: Revistas UNAM
590.#.#.a: Coordinación de Difusión Cultural
883.#.#.1: https://www.publicaciones.unam.mx/
883.#.#.q: Dirección General de Publicaciones y Fomento Editorial
850.#.#.a: Universidad Nacional Autónoma de México
856.4.0.u: https://revistas.unam.mx/index.php/aidis/article/view/71746/70694
100.1.#.a: Waskow, Régis Pereira; Kanno, Rodrigo; Tubino, Rejane Maria Candiota
524.#.#.a: Waskow, Régis Pereira, et al. (2021). PREMISES FOR ECO-EFFICIENCY ANALYSIS ON CONSTRUCTION AND DEMOLITION WASTE RECYCLING. Revista AIDIS de Ingeniería y Ciencias Ambientales. Investigación, desarrollo y práctica; Vol. 14, No. 2, 2021; 564- 577. Recuperado de https://repositorio.unam.mx/contenidos/4137925
245.1.0.a: PREMISES FOR ECO-EFFICIENCY ANALYSIS ON CONSTRUCTION AND DEMOLITION WASTE RECYCLING
502.#.#.c: Universidad Nacional Autónoma de México
561.1.#.a: Instituto de Ingeniería, UNAM
264.#.0.c: 2021
264.#.1.c: 2021-08-06
653.#.#.a: eco-efficiency; construction waste; demolition waste; LCA; LCC; sustainability
506.1.#.a: La titularidad de los derechos patrimoniales de esta obra pertenece a las instituciones editoras. Su uso se rige por una licencia Creative Commons BY-NC-ND 4.0 Internacional, https://creativecommons.org/licenses/by-nc-nd/4.0/legalcode.es, para un uso diferente consultar al responsable jurídico del repositorio por medio del correo electrónico revista_aidis@pumas.iingen.unam.mx
884.#.#.k: https://revistas.unam.mx/index.php/aidis/article/view/71746
001.#.#.#: 096.oai:ojs.pkp.sfu.ca:article/71746
041.#.7.h: spa
520.3.#.a: The construction industry is associated with significative impacts such a consumption of natural resources and waste generation. Eco-efficiency is an instrument for sustainable analysis which indicates the relation between environmental costs and impacts. While the most environmental method used is the lifecycle assessment (LCA), standardized by ISO 14040, the economic indicator should be selected according to the stakeholder. Total cost, Unit Cost, Net Present Value (NPV) and Internal Rate of Return (IRR) are some of the economic indicators used in the economic analysis of Construction and Demolition Waste (CDW) recycling, however, the search for literature regarding the Eco-efficiency analysis shows a tendency to use the total cost regardless of its objective. In this sense, the objective of this paper is to propose the main premises to be considered in the selection of the economic indicator and in the normalization of the analysis of the CDW recycling Eco-efficiency index results. The search method adopted was comprised for three steps: Systematic review of literature; Analysis and comparison of Eco-efficiency indicators (including economic and environmental inputs); Discussion about the main assumptions in the CDW recycling Eco-efficiency analysis. 14 articles were identified in the Science Direct and Springer platforms. This paper provides information to propose premises to the Eco-efficiency analysis on CDW recycling. As a result, was defined a standard Eco-efficiency analysis according the objective: assessment of the cost to minimizing impacts, a simple comparison between scenarios or economic and environmental viability. The first two objectives refer to the input data variation and the scenarios evaluated, respectively. The third objective needs to compare the results with the current scenario, the final disposal and established market material that recycled aggregate can replace. Using the simplified flowchart proposed for each CDW recycling Eco-efficiency analysis objective will allow to standardize studies of this aspect, thus enabling more credible, replicable and comparable development.
773.1.#.t: Revista AIDIS de Ingeniería y Ciencias Ambientales. Investigación, desarrollo y práctica; Vol. 14, No. 2, 6 de agosto de 2021; 564- 577
773.1.#.o: https://revistas.unam.mx/index.php/aidis/index
022.#.#.a: ISSN: 0718-378X
310.#.#.a: Cuatrimestral
300.#.#.a: Páginas: 564- 577
264.#.1.b: Instituto de Ingeniería, UNAM
doi: https://doi.org/10.22201/iingen.0718378xe.2021.14.2.71746
handle: 14ff4a14df358ab9
harvesting_date: 2023-08-23 17:00:00.0
856.#.0.q: application/pdf
file_creation_date: 2021-08-06 17:45:04.0
file_modification_date: 2021-08-06 17:45:16.0
file_creator: Blanca Patricia Gamboa Rocha
file_name: d4e24c3817475f4878ffc340e4d42000b53b61d1cf15af1e880b012d33cdf649.pdf
file_pages_number: 14
file_format_version: application/pdf; version=1.5
file_size: 436072
245.1.0.b: PREMISES FOR ECO-EFFICIENCY ANALYSIS ON CONSTRUCTION AND DEMOLITION WASTE RECYCLING
last_modified: 2023-08-23 17:00:00
license_url: https://creativecommons.org/licenses/by-nc-nd/4.0/legalcode.es
license_type: by-nc-nd
No entro en nada
No entro en nada 2