dor_id: 4132369
506.#.#.a: Público
590.#.#.d: Los artículos enviados a la revista "Geofísica Internacional", se juzgan por medio de un proceso de revisión por pares
510.0.#.a: Consejo Nacional de Ciencia y Tecnología (CONACyT); Scientific Electronic Library Online (SciELO); SCOPUS, Dialnet, Directory of Open Access Journals (DOAJ); Geobase
561.#.#.u: https://www.geofisica.unam.mx/
650.#.4.x: Físico Matemáticas y Ciencias de la Tierra
336.#.#.b: article
336.#.#.3: Artículo de Investigación
336.#.#.a: Artículo
351.#.#.6: http://revistagi.geofisica.unam.mx/index.php/RGI
351.#.#.b: Geofísica Internacional
351.#.#.a: Artículos
harvesting_group: RevistasUNAM
270.1.#.p: Revistas UNAM. Dirección General de Publicaciones y Fomento Editorial, UNAM en revistas@unam.mx
590.#.#.c: Open Journal Systems (OJS)
270.#.#.d: MX
270.1.#.d: México
590.#.#.b: Concentrador
883.#.#.u: https://revistas.unam.mx/catalogo/
883.#.#.a: Revistas UNAM
590.#.#.a: Coordinación de Difusión Cultural
883.#.#.1: https://www.publicaciones.unam.mx/
883.#.#.q: Dirección General de Publicaciones y Fomento Editorial
850.#.#.a: Universidad Nacional Autónoma de México
856.4.0.u: http://revistagi.geofisica.unam.mx/index.php/RGI/article/view/104/103
100.1.#.a: Bin Nisar, Umair; Rizwan, Muhammad; Rustam Khan, Muhammad; Farooq, Muhammad; Nadeem Qureshi, Shahid; Ashfaq Ahmed, Khawar
524.#.#.a: Bin Nisar, Umair, et al. (2019). Identification of sealing potential through fault seal analysis: A case study of Badin area, Lower Indus Basin, Pakistan. Geofísica Internacional; Vol. 58 Núm. 2: Abril 1, 2019; 139-150. Recuperado de https://repositorio.unam.mx/contenidos/4132369
245.1.0.a: Identification of sealing potential through fault seal analysis: A case study of Badin area, Lower Indus Basin, Pakistan
502.#.#.c: Universidad Nacional Autónoma de México
561.1.#.a: Instituto de Geofísica, UNAM
264.#.0.c: 2019
264.#.1.c: 2019-04-01
653.#.#.a: análisis de sellado de falla; relación shale gouge; factor shale smear; digarama tipo Allan; area de Badin; fault seal analysis; Shale gouge ratio; Shale smear factor; Allan-type diagram; Badin area
506.1.#.a: La titularidad de los derechos patrimoniales de esta obra pertenece a las instituciones editoras. Su uso se rige por una licencia Creative Commons BY-NC-SA 4.0 Internacional, https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.es, para un uso diferente consultar al responsable jurídico del repositorio por medio del correo electrónico revistagi@igeofisica.unam.mx
884.#.#.k: http://revistagi.geofisica.unam.mx/index.php/RGI/article/view/104
001.#.#.#: 063.oai:revistagi.geofisica.unam.mx:article/104
041.#.7.h: spa
520.3.#.a: The sealing potential of a fault can be originated from reservoir/nonreservoir rock juxtaposition. The present study focuses on the assessment of the sealing potential of the Lower Goru Formation of Badin area, Lower Indus Basin, Pakistan. The uni-directional force is one of the causes of leakage through the upper reservoirs of Lower Goru Formation, i.e. sand A, B and C and thus made a good seal as sand D. The fault properties associated with sealing capacity and leakage are estimated using algorithms. These algorithms are based on the juxtaposition of the reservoir rock against sealing lithology, deformation and present stage of stress regime within the fault plane relative to leakage. Time and depth contour maps of top of the Lower Goru Formation represent a half-graben structure showing uni-directional force in the area. An Allan-type diagram depicted a sand-sand juxtaposition for sand A and juxtaposition of sand A with sand B, thus eliminating any chances of sealing conditions. A similar diagram confirmed shale-sand juxtaposition for sands C and D. The juxtaposition diagram referred to an increase in shale gouge ratio (SGR) values from sand A to sand D with maximum values at sand D, thus classifying good fault sealing potential at sand D. Therefore, it is confirmed that sealing capacity of the fault (F2) increases from sand A (poor seal) where SGR = 0.44% - 0.9% and shale smear factor (SSF) = 0.23 - 1 to sand D (moderate seal) where SGR = 10% - 44% and SSF = 0.05 - 0.22 which means that sand D is more sealed than any other sand in the study area. doi: https://doi.org/10.22201/igeof.00167169p.2018.58.2.1966
773.1.#.t: Geofísica Internacional; Vol. 58 Núm. 2: Abril 1, 2019; 139-150
773.1.#.o: http://revistagi.geofisica.unam.mx/index.php/RGI
022.#.#.a: ISSN-L: 2954-436X; ISSN impreso: 0016-7169
310.#.#.a: Trimestral
300.#.#.a: Páginas: 139-150
264.#.1.b: Instituto de Geofísica, UNAM
doi: https://doi.org/10.22201/igeof.00167169p.2018.58.2.1966
handle: 00a364c820bd81f3
harvesting_date: 2023-06-20 16:00:00.0
856.#.0.q: application/pdf
file_creation_date: 2019-04-04 16:34:00.0
file_modification_date: 2022-04-08 14:00:01.0
file_creator: Nisar U.B.
file_name: 3cc7eaef5b3fd21f80cc0a6296d9bf78fafaa3ce69c00ede323244e3847eccda.pdf
file_pages_number: 12
file_format_version: application/pdf; version=1.4
file_size: 10659689
245.1.0.b: Identification of sealing potential through fault seal analysis: A case study of Badin area, Lower Indus Basin, Pakistan
last_modified: 2023-06-20 16:00:00
license_url: https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.es
license_type: by-nc-sa
No entro en nada
No entro en nada 2