La titularidad de los derechos patrimoniales de esta obra pertenece a las instituciones editoras. Su uso se rige por una licencia Creative Commons BY-NC 4.0 Internacional, https://creativecommons.org/licenses/by-nc/4.0/legalcode.es, para un uso diferente consultar al responsable jurídico del repositorio por medio del correo electrónico claudio.amescua@atmosfera.unam.mx.
Ver términos de la licenciaHuaquisto-Cáceres, Samuel, et al. (2024). Estudio experimental del uso de residuos de botellas de plástico en el hormigón convencional. Revista Internacional de Contaminación Ambiental; Vol. 40, 2024; 49-58. Recuperado de https://repositorio.unam.mx/contenidos/4161055
Autor(es)
Huaquisto-Cáceres, Samuel; Quenta-Flores, Darwin
Tipo
Artículo de Investigación
Área del conocimiento
Biología y Química
Título
Estudio experimental del uso de residuos de botellas de plástico en el hormigón convencional
Fecha
2024-11-21
Resumen
Improper management of plastic bottle waste is harming the environment. Recycling this waste for inclusion in the concrete matrix is a viable alternative for its final disposal. The objective of this study was to evaluate the mechanical behavior of conventional concrete with the addition of polyethylene terephthalate (PET) fibers, designed according to the procedures established by the American Concrete Institute for a strength of 20 MPa. The analyzed properties of the concrete included consistency, density, compressive strength, and flexural strength. Sixty cylindrical and 60 prismatic specimens with PET fiber additions of 0%, 2%, 4%, 6%, and 8% by weight of cement were prepared for testing at 7, 14, and 28 days of curing. The results indicate that maximum compressive and flexural strengths of 22.79 MPa and 3.19 MPa are achieved at 28 days by adding 2% and 6% PET fibers. Therefore, its application is recommended up to a proportion of 4%, where the corresponding dosage is 15.78 kilograms of PET fibers per cubic meter of concrete with a workable consistency.
Tema
compression; PET fibers; bending; concrete; recycling; compression; PET fibers; bending; concrete; recycling
Idioma
spa
ISSN
ISSN impreso: 0188-4999
