dor_id: 4110112

506.#.#.a: Público

590.#.#.d: Los artículos enviados a la revista "Journal of Applied Research and Technology", se juzgan por medio de un proceso de revisión por pares

510.0.#.a: Scopus, Directory of Open Access Journals (DOAJ); Sistema Regional de Información en Línea para Revistas Científicas de América Latina, el Caribe, España y Portugal (Latindex); Indice de Revistas Latinoamericanas en Ciencias (Periódica); La Red de Revistas Científicas de América Latina y el Caribe, España y Portugal (Redalyc); Consejo Nacional de Ciencia y Tecnología (CONACyT); Google Scholar Citation

561.#.#.u: https://www.icat.unam.mx/

650.#.4.x: Ingenierías

336.#.#.b: article

336.#.#.3: Artículo de Investigación

336.#.#.a: Artículo

351.#.#.6: https://jart.icat.unam.mx/index.php/jart

351.#.#.b: Journal of Applied Research and Technology

351.#.#.a: Artículos

harvesting_group: RevistasUNAM

270.1.#.p: Revistas UNAM. Dirección General de Publicaciones y Fomento Editorial, UNAM en revistas@unam.mx

590.#.#.c: Open Journal Systems (OJS)

270.#.#.d: MX

270.1.#.d: México

590.#.#.b: Concentrador

883.#.#.u: https://revistas.unam.mx/catalogo/

883.#.#.a: Revistas UNAM

590.#.#.a: Coordinación de Difusión Cultural

883.#.#.1: https://www.publicaciones.unam.mx/

883.#.#.q: Dirección General de Publicaciones y Fomento Editorial

850.#.#.a: Universidad Nacional Autónoma de México

856.4.0.u: https://jart.icat.unam.mx/index.php/jart/article/view/649/633

100.1.#.a: Laouchedi, Dalila; Bezzazi, Boudjema; Aribi, Chouaib

524.#.#.a: Laouchedi, Dalila, et al. (2017). Elaboration and characterization of composite material based on epoxy resin and clay fillers. Journal of Applied Research and Technology; Vol. 15 Núm. 2. Recuperado de https://repositorio.unam.mx/contenidos/4110112

245.1.0.a: Elaboration and characterization of composite material based on epoxy resin and clay fillers

502.#.#.c: Universidad Nacional Autónoma de México

561.1.#.a: Instituto de Ciencias Aplicadas y Tecnología, UNAM

264.#.0.c: 2017

264.#.1.c: 2019-06-06

653.#.#.a: Epoxy resin; Clay fillers; Physical properties; Mechanical properties

506.1.#.a: La titularidad de los derechos patrimoniales de esta obra pertenece a las instituciones editoras. Su uso se rige por una licencia Creative Commons BY-NC-SA 4.0 Internacional, https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.es, para un uso diferente consultar al responsable jurídico del repositorio por medio del correo electrónico gabriel.ascanio@icat.unam.mx

884.#.#.k: https://jart.icat.unam.mx/index.php/jart/article/view/649

001.#.#.#: 074.oai:ojs2.localhost:article/649

041.#.7.h: eng

520.3.#.a: The present work aims at investigating the effect of locally produced clay (Algeria), along with the effect of their size and rate on physical and mechanical properties of the composite material. This study is divided into two parts The first one is devoted to the study of the composite material based on epoxy resin with kaolin, using different size fractions at rates ranging from 2% to 20%. The second part examines epoxy resin-based composite with calcined kaolin (metakaolin) with regard to the influence of the structure, the particle size and the charge rate on the properties of the material. It is shown that the clay fillers give the epoxy resin different properties compared to the epoxy resin alone and, additionally, reduce the cost of materials. It was also observed that the fillers enhance the mechanical properties by increasing the rigidity of the material. There is a maximum value of 2.4 GPa to 18% kaolin, or more than 325% increase in the modulus of elasticity with respect to unfilled resin for the finer particle size. It was also found that the modulus of elasticity increases with increasing the loading rate. Indeed, the rigidity increases with increasing the filler rate. Moreover, for both fillers, lower fraction yields better results. Moreover, for both types of added fillers, lower fraction yields better results.

773.1.#.t: Journal of Applied Research and Technology; Vol. 15 Núm. 2

773.1.#.o: https://jart.icat.unam.mx/index.php/jart

022.#.#.a: ISSN electrónico: 2448-6736; ISSN: 1665-6423

310.#.#.a: Bimestral

264.#.1.b: Instituto de Ciencias Aplicadas y Tecnología, UNAM

doi: https://doi.org/10.1016/j.jart.2017.01.005

harvesting_date: 2023-11-08 13:10:00.0

856.#.0.q: application/pdf

file_creation_date: 2017-04-19 11:54:45.0

file_modification_date: 2017-04-19 11:54:47.0

file_creator: Dalila Laouchedi

file_name: 7c5a9586bc969d330555a833da06bea3747e3ed7026d16d3189845c735ce60d2.pdf

file_pages_number: 15

file_format_version: application/pdf; version=1.7

file_size: 7311881

last_modified: 2024-03-19 14:00:00

license_url: https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.es

license_type: by-nc-sa

No entro en nada

No entro en nada 2