dor_id: 4110112
506.#.#.a: Público
590.#.#.d: Los artículos enviados a la revista "Journal of Applied Research and Technology", se juzgan por medio de un proceso de revisión por pares
510.0.#.a: Scopus, Directory of Open Access Journals (DOAJ); Sistema Regional de Información en Línea para Revistas Científicas de América Latina, el Caribe, España y Portugal (Latindex); Indice de Revistas Latinoamericanas en Ciencias (Periódica); La Red de Revistas Científicas de América Latina y el Caribe, España y Portugal (Redalyc); Consejo Nacional de Ciencia y Tecnología (CONACyT); Google Scholar Citation
561.#.#.u: https://www.icat.unam.mx/
650.#.4.x: Ingenierías
336.#.#.b: article
336.#.#.3: Artículo de Investigación
336.#.#.a: Artículo
351.#.#.6: https://jart.icat.unam.mx/index.php/jart
351.#.#.b: Journal of Applied Research and Technology
351.#.#.a: Artículos
harvesting_group: RevistasUNAM
270.1.#.p: Revistas UNAM. Dirección General de Publicaciones y Fomento Editorial, UNAM en revistas@unam.mx
590.#.#.c: Open Journal Systems (OJS)
270.#.#.d: MX
270.1.#.d: México
590.#.#.b: Concentrador
883.#.#.u: https://revistas.unam.mx/catalogo/
883.#.#.a: Revistas UNAM
590.#.#.a: Coordinación de Difusión Cultural
883.#.#.1: https://www.publicaciones.unam.mx/
883.#.#.q: Dirección General de Publicaciones y Fomento Editorial
850.#.#.a: Universidad Nacional Autónoma de México
856.4.0.u: https://jart.icat.unam.mx/index.php/jart/article/view/649/633
100.1.#.a: Laouchedi, Dalila; Bezzazi, Boudjema; Aribi, Chouaib
524.#.#.a: Laouchedi, Dalila, et al. (2017). Elaboration and characterization of composite material based on epoxy resin and clay fillers. Journal of Applied Research and Technology; Vol. 15 Núm. 2. Recuperado de https://repositorio.unam.mx/contenidos/4110112
245.1.0.a: Elaboration and characterization of composite material based on epoxy resin and clay fillers
502.#.#.c: Universidad Nacional Autónoma de México
561.1.#.a: Instituto de Ciencias Aplicadas y Tecnología, UNAM
264.#.0.c: 2017
264.#.1.c: 2019-06-06
653.#.#.a: Epoxy resin; Clay fillers; Physical properties; Mechanical properties
506.1.#.a: La titularidad de los derechos patrimoniales de esta obra pertenece a las instituciones editoras. Su uso se rige por una licencia Creative Commons BY-NC-SA 4.0 Internacional, https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.es, para un uso diferente consultar al responsable jurídico del repositorio por medio del correo electrónico gabriel.ascanio@icat.unam.mx
884.#.#.k: https://jart.icat.unam.mx/index.php/jart/article/view/649
001.#.#.#: 074.oai:ojs2.localhost:article/649
041.#.7.h: eng
520.3.#.a: The present work aims at investigating the effect of locally produced clay (Algeria), along with the effect of their size and rate on physical and mechanical properties of the composite material. This study is divided into two parts The first one is devoted to the study of the composite material based on epoxy resin with kaolin, using different size fractions at rates ranging from 2% to 20%. The second part examines epoxy resin-based composite with calcined kaolin (metakaolin) with regard to the influence of the structure, the particle size and the charge rate on the properties of the material. It is shown that the clay fillers give the epoxy resin different properties compared to the epoxy resin alone and, additionally, reduce the cost of materials. It was also observed that the fillers enhance the mechanical properties by increasing the rigidity of the material. There is a maximum value of 2.4 GPa to 18% kaolin, or more than 325% increase in the modulus of elasticity with respect to unfilled resin for the finer particle size. It was also found that the modulus of elasticity increases with increasing the loading rate. Indeed, the rigidity increases with increasing the filler rate. Moreover, for both fillers, lower fraction yields better results. Moreover, for both types of added fillers, lower fraction yields better results.
773.1.#.t: Journal of Applied Research and Technology; Vol. 15 Núm. 2
773.1.#.o: https://jart.icat.unam.mx/index.php/jart
022.#.#.a: ISSN electrónico: 2448-6736; ISSN: 1665-6423
310.#.#.a: Bimestral
264.#.1.b: Instituto de Ciencias Aplicadas y Tecnología, UNAM
doi: https://doi.org/10.1016/j.jart.2017.01.005
harvesting_date: 2023-11-08 13:10:00.0
856.#.0.q: application/pdf
file_creation_date: 2017-04-19 11:54:45.0
file_modification_date: 2017-04-19 11:54:47.0
file_creator: Dalila Laouchedi
file_name: 7c5a9586bc969d330555a833da06bea3747e3ed7026d16d3189845c735ce60d2.pdf
file_pages_number: 15
file_format_version: application/pdf; version=1.7
file_size: 7311881
last_modified: 2024-03-19 14:00:00
license_url: https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.es
license_type: by-nc-sa
No entro en nada
No entro en nada 2